Flash Samsung Android using Odin tool

Summary: Detailed description about how to Flash Samsung Android mobile and Tablets using Odin tools.

Sponsored

How Flashing help:
1- If your Samsung gadgets has been stuck at Android or Samsung Logo and Hard Reset (Power + Volume up + Menu) fails.
2- If Application are installing of its own.
3- When you had forget the Password/Pattern.
4- If you are trying to unroot or rooting fails.
5- After installing Custom ROM on Samsung gadgets, if performance suffers.

Software & Tools needed:
1- Installation of USB driver on PC.
2- Latest Odin tool
3- Samsung Flash File download.

***Samsung Android device must be atleast 30 percent charge.
***It will cost data.

How to Flash Samsung Mobiles & Tablets:

1- To make communication between Odin tool & Samsung Mobile, you have to install driver.

2- Download Samsung Flash File and unzip it. (Flash file extension: .tar.md5)

3- Enable USB debugging. (Setting > Developer option > USB debugging)

4- Switch off your Android device.

5- Now, switch on the mobile by pressing (Power+Volume down+Menu). Phone will boot in Download mode.

Download mode Samsung mobile

6- Now, Press Volume up to enter download mode.

7- Unzip the Odin tool and run Odin tool. (.exe application)

8- Odin tool will be launched.

Odin tool interface

9- Now, Connect your Samsung Mobile to the PC using USB cable. (Message box on tool will display Added, if you had installed driver)

Added

10- Now, Click on PDA (or AP in other version) and assign the path of Flash file.

11- Click on start to initiate flashing.

12- After flashing is completed, if your Samsung Mobile or Tablet stuck at Logo.

13- Then you had to reset the device once.

Related Posts Plugin for WordPress, Blogger...

  • Darpein Thar lay

    Hi brothers, my android Samsung galaxy note SHV e-160s is dead by custom firmware upgrade. Its no power , no recovery, no download mode.So, I can’t do anything :'( . How to do for original firmware upgrade? Please replay and help me .Thanks 🙂